| Wheels for
your Flathead 45 Cubic Inch Solo & Servi-Cars |
| Solo Front Wheel Parts |
|
|
| A |
43885-30 |
Lock nut - Front bearing cone - 1930-up |
$5.95 |
| |
43885-30C |
Lock nut - front bearing cone - 1930-up chrome |
$6.95 |
| B |
43633-44 |
Oil Seal Retainer - 1944-up |
$8.95 |
| |
43633-44C |
Oil Seal Retainer - 1944-up - chrome |
$10.95 |
| C |
43632-44 |
Felt Seal - bearing hub cone - 1944-up |
$5.00 |
| D |
43635-30 |
Lock Washer - bearing cone 1930-up |
$2.75 |
| E |
43624-30 |
Cone - 1930-43 (no lip recessed for felt seal-early style) |
$44.95 |
| |
43624-44 |
Cone - 1930-43 (with lip recessed for felt seal - late
style) |
n/a |
| F |
8860A |
Wheel Ball Bearings - (26 needed) 30 in set |
$6.00 |
| |
43638-30 |
Grease Distributor - 1943-up (not shown) |
n/a |
| G |
43599-30 |
Front Brake Hub - complete with brake shell |
n/a |
| H |
8523 |
Rivets - front brake drum shell 3/16x9/16" round |
n/a |
| I |
44122-30 |
Front Brake Drum Shell - 1930-52 |
n/a |
| J |
43509-40 |
Front Wheel - complete with brake drum shell 16" |
n/a |
| K |
43617-30 |
Front Axle Sleeve - 1930-up |
$42.95 |
| L |
43630-30 |
Snap Ring - 1930 |
$2.95 |
| M |
43640-30 |
Inner Dirt Guard - 1930-up |
$11.95 |
| N |
534 |
Counter Pin - for front axle (2 needed) 3/32x1" |
$.50 |
| O |
7811 |
Axle nuts - (2 needed) 1930-up |
$3.95 |
| |
7811C |
Axle nuts -(2 needed) 1930-up - chrome |
$4.95 |
| P |
43871-30 |
Front Axle - 1930-up (approx. 3/8" thick) |
$26.95 |
| Q |
43007-40 |
16" Rim - must use #43036-40S special spoke set. Short
spokes cross once instead of twice. |
$74.95 |
| |
43006-40 |
16" Rim - black |
$99.95 |
| R |
43036-40S |
16" Spoke Set - 1940-up - stock 45" rim only
Stainless |
$84.95 |
| |
43038-40S |
16" Spoke Set - 1940-up - aftermarket 16" rims -
stainless. |
$84.95 |
* long spoke (6 7/8) crosses 4 times and short
spoke (4 11/16") crosses 2 times with stock 16" rim.
**long spoke (6 7/8) crosses 4 times and short spoke (3 11/16")
crosses 1 time with custom stock 16" rim.
* note: stock 45" front 16" rims have a different spoke pattern
angle then a standard 16" rim are no longer available. |
| S |
9851 |
Zerk Fitting - front hub |
$1.00 |
| A.M.C. rules now allow for stainless steel
spokes - you can blast for a cad plated look
NOTE: 45" solos were made 1929-52, the above listings accepts the
fact that some of you folks may be building later models using servi-car
motors. The above parts also fit 1932-40 servi-car front wheels as they
ran the same front wheels as solos did for those years. |
| Front Wheel Brake Drum Parts |
|
|
| 1 |
44122-30 |
Brake Drum Shell - 1930-up solo |
n/a |
| 2 |
44427-35 |
Brake Linings with rivets 1936-up |
$18.95 |
| 3 |
44402-40 |
Brake Shoes with linings. 1941-up |
$54.95 |
| 4 |
44265-31 |
Operating Shaft - 1937-up |
$28.95 |
| 5 |
44180-30 |
Bushing - backing plate NOS 1930-up |
$19.95 |
| 6 |
44450-35 |
Brake Shoe Pivot Stud - 1937-up |
$16.95 |
| 7 |
44486-28 |
Springs - 1929-up (2 needed) |
$4.95 |
| 8 |
44145-41 |
Brake Backing Plate - 1941-up |
$119.95 |
| 9 |
44350-30 |
Stud - stabilizer collar 1930-up (2 needed) |
$5.95 |
| 10 |
44476-35 |
Plate - pivot stud 1937-up |
$6.95 |
| 11 |
44307-31 |
Front Brake Lever - 1937-up |
$12.95 |
| |
44307-31C |
Front Brake Lever - 1937-up chrome |
$21.95 |
| 12 |
44346-29 |
Inner Copper Friction Washer - 1930-up |
$6.95 |
| 13 |
44340-30 |
Stablizer Center Plate - 1930-up |
$21.95 |
| 14 |
44250-29 |
Outer Copper Friction Plate - 1930-up |
$5.95 |
| 15 |
44344-29 |
Outer Spring Washer - 1930-up |
$6.95 |
| 16 |
44342-29 |
Outer Dust Cover - 1930-up |
$11.95 |
| 17 |
45162-41 |
Adjusting Screw - 1941-up (5/16-18") |
$11.95 |
| |
45162-41C |
Adjusting Screw - 1941-up chromed |
$14.95 |
| 18 |
38674-28 |
Adjusting Sleeve - 1929-40 |
$10.95 |
| 19 |
45172-28 |
Cable Lower Connection - with nut & pin 1929-up |
$17.95 |
| |
45172-28C |
Cable Lower Connection - with nut & pin 1929-up - chrome |
$19.95 |
| 20 |
45182-29 |
Nut - brake cable lower connection NOS 1929-up |
$6.95 |
| 21 |
8010-10 |
Brake Shackle Rebuilding Kit - 1936-up - Contains all
parts (studs, bushings, nuts, washers) needed to completely rebuild the
front brake shackle are assembly back to factory tolerances) |
$64.95 |
| 22 |
44225-30 |
Stud - backing plate to lower shackle 1940-up |
$19.95 |
| 23 |
44226-36 |
Stud - shackle to fork - upper, 1940-up |
$21.95 |
| |
44226-36C |
Stud - shackle to fork - upper, 1940-up chrome |
$23.95 |
| 24 |
44223-28 |
Bushings - brake shackle arm (2 needed) 1940-up |
$7.95 |
| 25 |
44231-38 |
Stud Nipple Extension - 1937-up
(2 needed) |
$5.00 |
| 26 |
9851 |
Zerk Fitting - special thread (2 needed) |
$1.00 |
| 27 |
44250-29 |
Zerk Fitting Nipple Extension - 1930-53 |
$5.95 |
| 28 |
44229-40 |
Lock Tab Washer - 1940-up |
$3.00 |
| 29 |
44211-40 |
Front Brake Shackle Arm - with bushings 1940-up |
$59.95 |
| |
44211-40C |
Front Brake Shackle Arm - with bushings 1940-up - chrome |
$63.95 |
| 30 |
45090-30 |
Brake Cable - inner / outer 1930-57 |
$19.95 |
| 31 |
45085-30 |
Brake Cable Outer Housing - vinyl coated 1930-up |
$11.95 |
| |
45085-30A |
Brake Cable Outer Housing - vinyl coated 1930-up chrome |
$39.95 |
| 32 |
45153-28 |
Inner Cable - 1928-up |
$8.95 |
| 33 |
45102-39 |
Cable Oiler kit - 1939-57 |
$14.95 |
| 34 |
4142-30 |
Cable Casing Oil Cup Kit - 1930-38 models |
$19.95 |
| 35 |
9980 |
Clamp - handlebar clamp to hold brake cable 1929-up |
$8.95 |
| 36 |
9968 |
Clip - brake cable holder to front forks - with screw |
$3.95 |
| 37 |
45002-41 |
Hand Lever - with bracket 1941-up polish |
$22.95 |
| |
45002-41C |
Hand Lever - with bracket 1941-up chrome |
$24.95 |
| 38 |
45017-41 |
Hand Lever Only - polish 1941-up |
$12.95 |
| 39 |
45002-28 |
Hand Lever - w/bracket 1928-40 solid steel then plated |
$59.95 |
| 40 |
45033-49 |
Bushing - hand lever holds cable in lever, 1940-up |
$3.95 |
| 41 |
45031-41 |
Pivot Screw - with nut - hand lever 1941-up |
$3.95 |
