| Tools for
your Flathead 45 Cubic Inch Solo & Servi-Cars |
|
|
| A |
94645-41 |
Clutch hub nut wrench -
1941-73 |
$59.95 |
| B |
96815-46 |
Motor bench stand -
45", 61", 74" |
$32.95 |
| C |
94681-33 |
Spoke Nipple Wrench |
$8.95 |
| D |
94621-35 |
Lug Nut Wrench |
$8.95 |
| E |
94401-30 |
Riders Hand Tool Kit |
$69.95 |
| F |
96700-38 |
End play gage, 45"
trany main shaft, big twins, motor sprocket shaft |
$27.95 |
| G |
94589-29 |
Cylinder Base Wrench |
$21.95 |
| H |
95960-41 |
Clutch Hub Puller -
45", big twins, 71-XL |
$24.95 |
| I |
94524-19 |
Valve Tappet Wrench |
$9.95 |
| J |
94521-31 |
Valve Cover Wrench 1
3/8" |
$13.95 |
| K |
94570-29 |
Spark Plug Wrench
7/8" fits 18mm champion plugs |
$12.95 |
| L |
94481-89 |
Tire Iron 9-1/2" |
$12.95 |
| M |
9929-1 |
Alemite Grease Fitting
Adapter T |
$59.95 |
| |
9850 |
Grease Fittings - alemite
3/32" thread |
$3.95 |
| |
94953-24 |
Tap 5/16-32" fits all
zerk fittings |
$14.95 |
| N |
94537-26 |
Manifold Wrench 1
7/8" |
$26.95 |
| O |
95727-38 |
Tappet Puller
45-74-80" flatheads |
$39.95 |
| P |
96295-65 |
Timing mark clear view
plug |
$5.95 |
| Q |
96395-41 |
Clutch Gear Oil Seal Guide
- for installing clutch gear through oil seal in transmission without
damaging tip of seal, 1941-73 (works with original NOS seals only) |
$9.95 |
| R |
95021-29 |
Mini Chain Breaker |
$14.95 |
| S |
5540-4 |
1/4-24 heli coil repair
kit (12 pack) |
$69.95 |
| |
5540-7 |
7/16-16 heli coil repair
kit (16 pack) |
$84.95 |
| |
R389-8-2 |
Replacement Inserts
7/16-16 |
$1.95 |
| T |
96365-42 |
Gas Valve Shut Off Tool
for alignment |
$109.95 |
| U |
96798-43 |
Vise Jaw Aluminum Pads (2) |
$14.95 |
| V |
7094 |
14-18mm Spark Plug Hole
Thread Chaser |
$10.95 |
| W |
96700-32 |
Valve Guide Driver Tool
Set (3) |
$21.95 |
| X |
96780-32 |
Piston Pin Lock Ring
Installer Tool |
$21.95 |
| Y |
95952-33 |
Clamping Tool for Rods |
$58.95 |
| Z |
95970-32 |
Wrist Pin Bushing Remover
Tool |
$69.95 |
| |
7611-2 |
Rocker bushing
installation tool 45 & B/T |
$12.95 |
| Special
Reamers Flatheads |
| |
94812-37 |
Pinion Shaft Bushing |
$124.96 |
| Special
Thread Taps For Antique Motorcycles |
| |
94953-15 |
1/4-24" cam cover,
trany, oil pumps, etc. |
$14.95 |
| |
94953-24 |
5/16-32 zerk fitting holes |
$14.95 |
| |
94953-30 |
3/8-20" 1930-72 brake
drums |
$18.95 |
| |
94953-46 |
7/16-16" head bolts,
45", UL, VL, Knuckle |
$21.95 |
| |
94953-31 |
13/16-24" 1931-35
springer bar ends |
$44.95 |
| |
94953-36 |
7/8-24" 1936-57
springer bar ends |
$44.95 |
| Special
Thread Dies For Antique Motorcycles |
| |
94951-15 |
oil pump studs, etc. |
$22.95 |
| |
94951-29 |
fork neck stem, 45",
1954-85 XL |
$48.95 |
| |
94951-30 |
Fork stem - big twins -
springer - glides |
$49.95 |
