| Springer Handlebars
for your Flathead 45 Cubic Inch Solo & Servi-Cars |
|
|
| 1 |
55951-36 |
Springer Bars - 1936-up (no components) |
$199.95 |
| |
55951-36C |
Springer Bars - chrome - 1936-up (no components) |
$259.95 |
| |
55903-37 |
Springer Bars - complete 1936-up (all components)
black |
$359.95 |
| |
55903-37C |
Springer Bars - complete 1936-up (all components) chrome |
$399.95 |
| 2 |
55945-41 |
Hollywood Bars - black (no components) |
$289.95 |
| 3 |
56200-36 |
Handlebar Control Packaged - everything but the bars |
$159.95 |
| |
56200-36C |
Handlebar Control Packaged - chrome spirals - bolts |
$174.95 |
| 4 |
56245-35 |
Spiral - (2 needed) 1935-up springer bars |
$34.95 |
| |
56245-35C |
Spiral - (2 needed) 1935-up springer bars
- chrome |
$39.95 |
| |
56246-35 |
Spiral - left hand 1935-up needed on right side if converting to a
mikuni carb. |
$39.95 |
| |
56246-35C |
Spiral - left hand 1935-up needed on right side if converting to a
mikuni carb. chrome |
$39.95 |
| |
56250-35C |
Replacement Spiral Cover -
all 1935-up chrome, presss on spirals |
$9.95 |
| 5 |
56271-36 |
Plunger Kit - (roller block, pin, washer, plunger &
screw) one side |
$23.95 |
| 6 |
56270-36 |
Plunger - (2 needed) 1937-up springer bars |
$16.95 |
| 7 |
56278-10 |
Plain Roller Washer -
1911-up |
$2.00 |
| 8 |
56281-31 |
Roller Block - 1931-up (2 needed) |
$3.00 |
| 9 |
9281 |
Roller Pin - 1916-up (2 needed) |
$2.00 |
| 10 |
56287-36 |
Handlebar End Nut - 1936-up springer bars 7/8-24" |
$12.95 |
| |
56287-31 |
Handlebar End Nut - 1931 - 35 springer bars 13/16-24" |
$12.95 |
| 11 |
56276-31 |
Set Screw - needed to hold outer cable inside bars |
$2.00 |
| 12 |
4636 |
Bolts - Cad 1940-up springer bars (2 needed) |
$3.00 |
| |
4636P |
Bolts - Parkerized 1940-up springer bars (2 needed) |
$3.00 |
| |
4636C |
Bolts - Chrome 1940-up springer bars (2 needed) |
$3.00 |
| 13 |
56500-32 |
Inner-Outer Cable - used on both sides - vinyl coated |
$14.95 |
| |
56501-32 |
Inner-Outer Cable - used on both sides - cloth covered |
$48.95 |
| 14 |
56502-32 |
Outer Cable - with end - 1932-up (throttle or spark advance,
3/4" dia. end) |
$11.95 |
| |
56502-32A |
Outer Cable - w/end "original style" cloth covered
and coated |
$38.95 |
| 15 |
56373-09 |
Inner Cable - 1911-up, throttle or spark advance |
$5.95 |
| 16 |
56204-35 |
Black Rubber Grips - 4" short, 1935-up springer bars |
$21.95 |
| |
56203-35 |
White Rubber Grips - 4" short, 1935-up springer bars |
$21.95 |
| |
56204-08 |
Black Rubber Grips - 5" long, 1909-36 springer bars |
$23.95 |
| 17 |
56283-31 |
Screw - inner wire, 1931-up springer bars |
$3.00 |
| 18 |
71800-26 |
Horn Switch - chrome with wires 1926-up |
$9.95 |
| 19 |
71840-29 |
On-Off or High Low Switch - off in center, with clamps
1929-up - chrome |
$9.95 |
| 20 |
70060-29 |
Spot Light Switch - on-off with clamps (wires come out of
the side) |
$23.95 |
| |
70058-50 |
Directional Switch - Off in center, with clamps |
$23.95 |
| 21 |
2626 |
Screws - fits all switches - special 8-32 nc
- cad plated |
$.75 |
| |
2626P |
Screws - fits all switches - special 8-32 nc
- parkerized |
$1.00 |
| |
2626C |
Screws - fits all switches - chrome |
$1.00 |
| 22 |
9967 |
Cable Clamp - fits throttle & spark advance cable |
$5.00 |
| |
9967C |
Cable Clamp - fits throttle & spark advance cable
- chrome, aluminum heads |
$8.95 |
| 23 |
56604-37 |
Cable Clamp - fits
throttle cable on iron head models |
$13.95 |
| 24 |
46550-36 |
Lock Plate (dust cover) stainless like original |
$17.95 |
| 25 |
46560-40 |
Top Stem Nut 7/8"-24
- cad plated |
$10.95 |
| |
46560-40P |
Top Stem Nut 7/8"-24
- parkerized |
$10.95 |
| |
46560-40C |
Top Stem Nut 7/8"-24 - chrome |
$12.95 |
| |
8008-1 |
Chrome Top Stem Acorn Nut
- 7/8-24" |
$15.95 |
| 26 |
27450-36 |
Throttle Cable Block - all
Linklert carbs |
$5.95 |
| *Chrome spirals were used before and after the
war on all models. Harley-Davidson 45 solos were made 1929-52, the servi-car
was made 1932-72 but ran a springer in 1932-57, From 1958-73 they used
wide-glide forks. |
