|
Pistons and
Rings for your Flathead 45 Cubic Inch Solo & Servi-Cars |
|
***NOTE: Be sure to measure your
bore and calculate the correct size pistons to use!
STANDARD 45" BORE IS 2.745"
measurements should be taken 1/2" from
the top of the cylinder-front to rear. Clearance in cylinder should be .001"
to .992" in normal weather climates, more in southern states.
If by chance you
miscalculate, we will exchange pistons. Please include $4.00 for shipping
and handling along with invoice. Cylinder Sleeves located on
Top End Parts Page. Standard "45" Bore is 2.745" |
|
Piston Assemblies with Rings, Pins &
Keepers. (1929-73 45" Solo & Servi-Car) |
|
|
22251-29 |
2.745" |
STD |
$89.95 |
| 22253-29 |
2.755" |
.010" |
$89.95 |
| 22254-29 |
2.765" |
.020" |
$89.95 |
| 22255-29 |
2.775" |
.030" |
$89.95 |
| 22256-29 |
2.785" |
.040" |
$89.95 |
| 22257-29 |
2.795" |
.050" |
$89.95 |
| 22258-29 |
2.805" |
.060" |
$89.95 |
| 22259-29 |
2.815" |
.070" |
$89.95 |
| 22260-29 |
2.825" |
.080" |
$89.95 |
| 22261-29 |
2.835" |
.090" |
$89.95 |
| 22262-29 |
2.845" |
.100" |
$89.95 |
|
Replacement
Oil Ring Sets For 45" Motors -
(Set For 2 Pistons) |
| |
Old Style 1/8"
1929-55 |
New Style 3/16"
1950-73
|
|
|
22355-38 |
STD |
$28.95 |
22355-52 |
STD |
$34.95 |
| 22357-38 |
.010 |
$28.95 |
22357-52 |
.010 |
$34.95 |
| 22358-38 |
.020 |
$28.95 |
22358-52 |
.020 |
$34.95 |
| 22359-38 |
.030 |
$28.95 |
22359-52 |
.030 |
$34.95 |
| 22360-38 |
.040 |
$28.95 |
22360-52 |
.040 |
$34.95 |
| 22361-38 |
.050 |
$28.95 |
22361-52 |
.050 |
$34.95 |
| 22363-38 |
.060 |
$28.95 |
22362-52 |
.060 |
$34.95 |
| 22363-38 |
.070 |
$28.95 |
22363-52 |
.070 |
$34.95 |
| |
|
|
22364-52 |
.080 |
$34.95 |
| |
|
|
22365-52 |
.090 |
$34.95 |
| Piston Pins |
|
|
| 22700-32 |
Piston Pin -
STD. |
$10.95 |
| 22702-32 |
Piston Pin - .002" oversize |
$10.95 |
| 22704-32 |
Piston Pin - .004" oversize |
$10.95 |
| 22581-32 |
Early Piston Pin Locks (ea.) 2 needed |
$3.95 |
| 22582-52 |
Late Piston Pin Locks (ea.) 2 needed |
$1.75 |
| Gasket Sets |
|
 Our gaskets are the best money can buy. Don't be fooled by cheap
surplus gasket seals that have shrunk-up and are no longer able to do the
job they were intended to do. Our kit comes with all o-rings, oil seals,
asbestos head gaskets to rebuild your 45" right. Kit fits 1940-68 but
most gaskets will fit earlier or later models. (will put in the extra
o-rings and gaskets for 1969-73 models and/or copper head gaskets for iron
heads at your request.)
|
| 17026-40 |
Complete Motor Gasket Set with asbestos head gaskets |
$29.95 |
| 17025-36 |
Complete Motor Gasket Set with copper head gaskets |
$32.95 |
| 17031-40 |
Top End Gasket Set with asbestos head gaskets |
$19.95 |
| 17030-36 |
Top End Gasket Set with copper head gasket |
$22.95 |
