| Horns & Brackets for your Flathead 45 Cubic Inch Solo & Servi-Cars |
| 1942-45 Springer Horn Set-Up |
| This horn set-up was stock on 1942-45 models, if
your planning on a ride control or front shock you need to upgrade to kit 69000-46 |
|
|
A |
69118-42 |
Spring Washer |
$4.95 |
| B |
69037-42 |
1942-45 Horn Terminal Plate |
$10.95 |
| C |
69130-36 |
1942-45 Early Horn Bracket |
$19.95 |
| Complete Horn Kit |
|
|
| |
69000-46 |
20 pieces. Kit does NOT include the Horn Bracket 69003-42. 6
volt style |
$89.95 |
| |
69000-46C |
Same as 69000-46 except in chrome |
$99.95 |
| |
69135-47 |
Terminal Screw Kit |
$16.95 |
| Springer Horn Set Up |
| A |
69001-42 |
6v Springer horn-with grill |
$44.95 |
| |
69005-85 |
12v Springer horn-with grill |
$46.95 |
| B |
69003-42 |
Horn Bracket - for repro horn |
$12.95 |
| |
69003-42C |
Horn Bracket - for repro horn - chrome |
$19.95 |
| C |
69001-41 |
Reproduction of original Delco Remy horn-chrome wing face
has mounting bracket attached |
$149.95 |
| D |
69107-42 |
Upper Bolts (2 needed) |
$4.95 |
| E |
69118-42 |
Spring Washer |
$4.95 |
| |
69118-42C |
Spring Washer - chromed |
$8.95 |
| F |
69120-36 |
Lower Bracket 1936-45 (shorter) |
$11.95 |
| |
69120-36C |
Lower Bracket 1936-45 (chrome) |
$23.95 |
| |
69120-45 |
Lower Bracket 1946-57 (longer) |
$12.95 |
| G |
69124-36 |
Spring Clip - fits under fender for reinforcement |
$4.50 |
| H |
69000-36 |
Screw & Nut - Mounting Kit - 1942-57 parkerized |
$12.95 |
| Consists of: |
69107-42 |
Upper shoulder Bolts |
|
| |
7620 |
Upper Shoulder Nut |
|
| |
7021 |
Lock Washer |
|
| |
1202 |
Fillister Head Screws with Nuts |
|
| |
2762 |
Lower bracket bolts 1/4" & nuts |
|
| Horn Grill Faces |
|
|
| |
69020-36 |
1937-up winged face - chromed |
$26.95 |
| |
69021-36 |
1937-up winged face - raw metal (must be painted) |
$21.95 |
| |
69020-31 |
1930-36 Sunburst Face - chromed |
$39.95 |
| |
69021-31 |
1930-36 Sunburst Face - bare metal (must be painted) |
$39.95 |
| |
2672 |
Screws (3) original horn face - 10-24" x 1/2" |
$6.95 |
| |
2672A |
Screws (3) repro horn face |
$6.95 |
| 2672A has a small screwdriver slot to bring it
thru the face from the back-has round smooth head like original. |
| 1937-57 Springer Horn Data
Finish: The horn face on civilian models 1937-41 was chrome plated,
during the war years the grill was black. After the war years the face was
again chromed. On servi-cars 1953-57, the wing face was painted gloss
black. Horns are adjusted by an adjusting screw in the back of the horn
(repro horns only), in the center of the horn on original horns (take off
face) Call our new tech line at: 1-(518) 446-0251 If you have questions on
what horn set-up is best for your restoration |
