| Clutch for your Flathead 45 Cubic Inch Solo & Servi-Cars |
|
|
| 1 |
 |
37465-41 |
Oil Seal - clutch side of housing (left side) 1941-73 (in
transmission gasket kit) |
$10.95 |
| 2 |
 |
37480-41 |
Thrust Washer - roller end (large and flat) 1941-73 |
$4.95 |
| 3 |
 |
37474-41 |
Race - transmission housing - clutch side (1941-73) |
$47.95 |
| 4 |
 |
37482-41 |
Thrust Washer - clutch gear (large and skiny) 1941-73 |
$4.95 |
| 5 |
 |
9084 |
Bearings - clutch gear - standard .125" x .615"
1937-73 (40 in set) |
$10.00 |
| |
9085 |
Bearings - clutch gear - .0004 oversize 1941-73 (40 in set) |
$10.00 |
| |
9086 |
Bearings - clutch gear - .0008 oversize 1941-73 (40 in set) |
$10.00 |
| 6 |
 |
37467-41 |
Thrust Ball Bearings - complete 1941-73 |
$14.95 |
| 7 |
 |
37477-41 |
Race - thrust bearing with groove 1941-73 |
$21.95 |
| 8 |
|
37354-41 |
Snap Ring - 1941-73 |
n/a |
| 9 |
 |
37335-41 |
Oil Seal Kit - complete - fits in clutch gear for push rod
seal 1941-73 |
$14.95 |
| 10 |
 |
37450-41 |
Clutch Gear - with bushings 1941-73 |
$99.95 |
| 11 |
|
37458-41 |
Bushing - clutch gear 1941-73 |
$17.95 |
| 12 |
 |
37287-41 |
Clutch Push Rod - with bearing on end 1941-73
(USA) |
$39.95 |
| |
 |
37288-41 |
Clutch Push Rod - with bearing on end 1941-73
(Imported) |
$24.95 |
| 13 |
 |
37052-41 |
Clutch Release Lever - 1941-43 solo, 1941-73 Servi-Car,
narrow I.D.=1.975" (about two inches wide) |
$39.95 |
| 14 |
37052-44 |
Clutch Release Lever - 1944-52 solo, wide style (some WLA's)
about 2-1/8" wide |
$49.95 |
| 15 |
 |
8920-3 |
Clutch Arm Cup Rebuild Kit - rebuilds the back side of your
arm that rides on the pushrod |
$10.95 |
| 16 |
 |
37067-41 |
Zerk Fitting - clutch release arm. "stainless" |
$6.95 |
| 17 |
 |
8904-6 |
Clutch Arm Rebuilding Kit - pivot bolts, lock tabs washers
& bushings fits 1941-43 solo models 1941-73 servi-car |
$19.95 |
| |
8903-6 |
Clutch Arm Rebuilding Kit - pivot bolts, lock tabs washers
& bushings fits 1941-43 solo models 1941-73 servi-car - chrome plated |
$21.95 |
| 18 |
 |
37076-41 |
Screw - clutch release arm lever (2 needed) 1941-73 (ea.) |
$5.00 |
| 19 |
|
37080-41 |
Lockwasher Tab - clutch release lever (2 needed) 1941-73
(ea.) |
$2.00 |
| 20 |
|
8411-8 |
Clutch Arm Rebuilding Kit - pivot bolts, locktabs, washers
& bushing fits 1944-52 solo models (wide style cover) |
$18.95 |
| |
|
8410-8 |
Clutch Arm Rebuilding Kit - pivot bolts, locktabs, washers
& bushing fits 1944-52 solo models (wide style cover) - Chrome Plated |
$19.95 |
| 21 |
 |
37077-41 |
Screw - clutch release arm lever (2 needed) 1944-52 solo |
$5.95 |
| 22 |
 |
37081-44 |
Lockwasher Tab - clutch release lever (2 needed) 1944-52
solo models |
$2.00 |
| 23 |
 |
37581-47 |
Stud Nut - with grove for use with #38011-47 pressure plate
spring retainer 1947-73 with safety knob on plate |
$2.50 |
| 24 |
|
38011-47 |
Retainer - clutch hub
1941-73 |
$14.95 |
| 25 |
 |
38075-41 |
Clutch Spring Set - 1941-73 (10 in set) |
$15.95 |
| 26 |
 |
37358-41 |
Adjusting Screw - push rod 1941-73 |
$6.95 |
| |
37358-41S |
Adjusting Screw - push rod 1941-73
- stainless |
$9.95 |
| 27 |
 |
37361-41 |
Nut - adjusting screw 1941-73 |
$5.50 |
| 28 |
 |
37873-41 |
Clutch Release Disk - 1941-73 |
$39.95 |
| 29 |
 |
HDP-7 |
Clutch Kit - (2 1/2 plates
bonded) Complete less 37862-41 friction lining on hub.
fits 1941-73 |
$46.95 |
| 30 |
 |
37977-41 |
Steel Clutch Disk - (2 needed) 1941-73 |
$14.95 |
| 31 |
|
37695-41 |
Clutch Sprocket Housing - complete 1941-52 solo, 1941-63
servi-car |
$159.95 |
| |
|
37703-64 |
Clutch Sprocket Housing - complete with electric starter
gear 1964-73 GE NOS |
$199.95 |
| 32 |
|
37713-69 |
Electric Starter Ring Gear - 1964-73 GE |
$99.95 |
| 33 |
 |
37460-41 |
Clutch Hub Nut - 1941-73 |
$16.95 |
| 34 |
 |
37462-41 |
Locktab Washer - clutch hub nut 1941-73 |
$5.95 |
| 35 |
|
37577-41 |
Retainer Plate - (thin tin
plate that goes onto clutch hub) 1941-73 |
$10.95 |
| 36 |
|
37568-41 |
Retainer - clutch hub 1941-73 |
$27.95 |
| 37 |
|
8856A |
Ball Bearings - clutch hub (60 in set) 1941-73 |
$9.95 |
| 38 |
 |
RBK |
Roller Bearing Kit - has long needle bearings to eliminate
retainer and give you a smoother ride. |
$39.95 |
| 39 |
|
37551-41 |
Clutch Hub - with friction lining
riveted on 1941-73 |
$109.95 |
| 40 |
|
37862-41 |
Friction Lining - clutch hub 1941-73 (comers with #8227
rivets) |
$12.95 |
| 41 |
|
8227 |
Rivets - clutch hub stud (7 in set 6 needed) |
$3.95 |
| 42 |
|
37584-41 |
Stud - clutch hub stud - long (3 needed) 1941-73 |
$6.95 |
| 43 |
|
37586-41 |
Stud - clutch hub - short (7 needed)
1941-73 (ea.) |
$4.95 |
| 44 |
|
37574-44 |
Springs - clutch hub stud to bearing plate (3 in set)
1941-73 |
$3.00 |
| 45 |
 |
36975-41 |
Clutch Cable Assembly -
1941-73 (must order CLEVIS END if needed) |
$39.95 |
| |
36975-41C |
Clutch Cable Assembly -
1941-73 (must order CLEVIS END if needed) - Chrome |
$54.95 |
| 46 |
 |
36916-36 |
Clevis End - 1936-up 10/32" thread (fits our clutch
cable & others) |
$12.95 |
| 36916-36P |
Clevis End - 1936-up 10/32" thread (fits our clutch
cable & others) parkerized |
$12.95 |
| |
36916-36C |
Clevis End - 1936-up 10/32" thread (fits our clutch
cable & others) chromed |
$12.95 |
| 47 |
 |
36882-47 |
Spring - clutch cable on
Servi-Cars 1947-up |
$11.95 |
