New Page 2

Cam Cover, Gears and Bushings for your Flathead 45 Cubic Inch Solo & Servi-Cars

1 6769 Cam shims (.007" thick) $.50
2 25201-37 Cam Cover - 1937-58 n/a
  25200-59 Cam Cover - 1959-73 n/a
3 25287-37 Spring - 1937-73 $17.95
4 25281-37 Seal Ring Cover - 1937-73 n/a
5 25350-37 Cam Cover Breather Valve - 1937-73 $12.95
6 25601-37A Cam Cover Bushings (4 needed) 1937-73 $11.95
7 271 Pins - all bushings $.50
8 25501-37 No. #3 Cam 1937-73 W&G motors n/a
9 25502-37 No. #2 Cam 1937-58 W&G motors n/a
10 25502-59 No. #2 Cam 1959-73 G motors n/a
11 25860-37 Gear only for above cams (press on) n/a
12 25503-37A No. #4 Cam 1937-73 W&G motors n/a
13 25504-37 No. #1 Cam 1937-73 W&G motors n/a
14 25500-37 Cam Set - 1937-73 $424.95
  80600-37 Cam Set - 1937-73 WLDR Street Hi-Performance $449.95
  25505-37 Cam Shafts Only - 1937-73 (4) press off-on $129.95
16 25586-37 Cam Bushings (#4) 1937-73 $10.95
17 25588-37 Cam Bushing (#2) 1937-58 $10.95
18 25588-57 Cam bushing (#2) 1959-73 $11.95
19 25590-37 Cam Bushing (#1) 1937-73 $13.95
20 25593-37 Pinion Shaft Bushing 1937-73 $10.95
21 25595-37 Cam Bushing (#3) 1937-73 $11.95
22 26383-32 Screw - front & rear chain oilers 1933-73 $5.95
  26383-32S Screw - front & rear chain oilers - stainless w/shims & nut $10.95
22 6170 Shims - adjusting screw $7.95
23 26550-38 Oil Pressure Switch - 1938-73 $22.95
24 1300 Circuit Breaker Screws 1938-73 $1.00
  3422W Hold Down Bolts 1966-74 (2 needed) $.50
25 1202 Screws - relief pipe special (4 needed) $.50
26 24912-37 Relief Pipe 1937-73 $23.95
27 24921-37 Gasket - relief pipe - 1937-73 $1.00
28 2341 Cam Cover Screws - (11 in set) cad $11.95
  2341P Cam Cover Screws - parkerized $12.95
  2341C Cam Cover Screws - chrome $14.95
  2341A Cam Cover Allen Screws - chrome (the above screws are special 1/4-24" thread) $21.95
29 25226-37 Cam Cover Gasket - 1937-73 $3.95

A 271 Pin - case bushings 1937-73 $.50
B 333 Pin - oil strainer 1937-73 $1.00
C 24011-37 Pinion Gear - 1937-73 $32.95
D 24696-39 Seal Ring - 1939-73 $12.95
E 24699-37 Spring - seal ring 1939-73 $3.00
F 24975-37 Oil Strainer - 1937-73 $8.95
G 25601-37A Case Bushing (4 needed) 1937-73 $11.95
H 25776-37 Idler Gear 1937-73 with bushing $61.95
I 25785-30 Idler Gear Bushing 1932-73 $5.75
J 25788-30 Idler Gear Stud 1932-73 $10.95
K 25794-30 Screw - idler gear stud 1932-73 $4.95
L 26318-37 Drive Gear (drives oil pump) 1937-73 $29.95
M 25810-15 Snap Ring - idler gear stud 1929-73 $.90
N 25811-11 Fiber Washer - 1932-73 $.75
O 31071-37 Gear - generator, with oil slinger (all 3 brush) $22.95
P 25235-36 Fitting - crankcase oil line nipple 1936-73 $4.95
Lower Motor Mounting Kit

  9626-16 Duplicate of original, hardened bolts-castle nuts-washers to mount the motor into the frame. parkerized CP 1035 bolts $22.95
  9625-16 Duplicate of original, hardened bolts-castle nuts-washers to mount the motor into the frame. Chrome CP 1035 bolts $24.95
Motor Stud & Nut Kit
  With chrome nuts. 1937-73. Contain all the necessary hardware to bolt together a set of 45" motor cases. Consists of:  
  (1) 24812-37 Stud (1) 24816-40 Stud
(2) 24813-37 Stud (10) 7698 Nuts - 1/4-24" (special thread)
(2) 24811-10 Stud (2) 4080 Bolts
  8620-17 Motor Case Stud & Nut Kit: contains all the studs and nuts to bolt together a set of cases 1937-73 - Cad Plated $22.95
  9697-17 Motor Case Stud & Nut Kit: contains all the studs and nuts to bolt together a set of cases 1937-73 - Parkerized $22.95
  8619-17 Motor Case Stud & Nut Kit: contains all the studs and nuts to bolt together a set of cases 1937-73 - Chrome $25.95
Home Search On-Sale Current Order Help

order online or by phone: toll free 1-(800)-445-1945| info@45restoration.com

Copyright © 45 Restoration Company. 1973-2006. All Rights Reserved.
Web Development by urlis.com / Hosting provided by digicomis.com