| Battery's
& Box's for your Flathead 45 Cubic Inch Solo & Servi-Cars |
|
|
| A |
66202-29 |
Battery Box (no lid)
1929-up solo - bare metal - must be painted (no lid) |
$74.95 |
| |
66202-29B |
Batter Box (with lid)
1929-52 solo. This box is powder painted in gloss black and comes with lid |
$94.95 |
| |
66202-29C |
Battery Box - w/lid -
chrome - 1932-52 solo |
$99.95 |
| B |
66203-40 |
Battery Box (no lid)
1940-63 servi-car |
$68.95 |
| |
66203-40B |
Battery Box (with lid)
1940-63 servi-car - black |
$99.95 |
| |
66203-40C |
Battery Box (with lid)
1940-63 servi-car - chrome |
$109.95 |
| C |
65282-51 |
Strap - for supporting
servi-car battery box |
$19.95 |
| D |
66377-29 |
Lid - battery box 1929-up
- bare metal |
$14.95 |
| |
66377-29B |
Lid - battery box 1929-up
- black |
$21.95 |
| |
66377-29C |
Lid - battery box 1929-up
- chrome |
$21.95 |
| E |
66302-29 |
Frame Plate - attaches to
back of solo battery box, has threaded holes (pr.) |
$6.95 |
| F |
49180-36 |
Frame Plate Studs -
(needed for crash bar) (pr.) |
$12.95 |
| |
49180-36C |
Frame Plate Studs -
(needed for crash bar) (pr.) - chrome |
$14.95 |
| G |
66387-24 |
Wing Nut - for battery lid
1929-up (pr.) |
$4.95 |
| H |
66110-23 |
Terminal Felt Kit |
$10.95 |
| I |
BB-1 |
Sleeve - 12 volt battery |
$28.95 |
| J |
66100-15 |
Pads - for bottom &
top of battery box |
$8.95 |
| K |
66006-29 |
Battery - 6v 1929-up All
V-twins |
n/a |
| L |
12N5 |
Battery - 12v All V-twin |
$29.95 |
***Battery
Warranty Information
Our Battery's are unconditionally guaranteed up to 90 day from date of
purchase. No guarantee for cracked or physically damaged cases or terminal
at any time. Damage caused in shipping must be reported to us within 48
hours after reciept of shipping. All batteries are shipped dry charged
because of U.P.S. requirements. Battery acid can be purchased at NAPA
stores (leftover works great at de-chroming & zinc removal of old
parts.) |
| ***The solo
battery box has a tab on the back that bolts to the rear fender, (see
arrow) and a front tab that bolts to the seat plunger frame tube. *Use
bolts #4013
(5/16-24" x 1-1/8") on the frame plate if not using a rear crash
bar. The servi-car battery box has a clamp welded on the back of it that
fits against the tie bar (#47808-32).
It the has a long strap (c) (#65282-51)
that mounts to the muffler clamp (#65284-38)
for support. The bottom tab bolts to the frame. See Servi-Car
Box Parts for tie bars and servi-car box parts. |
